Required system components, Install the cn2dn device – Rockwell Automation 1788-CN2DN ControlNet-to-DeviceNet Linking Device Installation Instructions User Manual
Page 9
Advertising
ControlNet-to-DeviceNet Linking Device 9
Publication
1788-IN052D-EN-P - February 2007
Required System Components
In order to install your 1788-CN2DN device, you will need the
following system components.
• A 24V dc power supply
and
• A securely installed zinc-plated, yellow-chrome steel, DIN rail,
panel, or other suitable fixture.
Install the CN2DN Device
Complete the following tasks to install the CN2DN Linking Device.
• Mount the CN2DN Device on a DIN Rail
• Mount the CN2DN Device on a Panel or Other Fixture
• Wire a Power Supply to the CN2DN Device
• Uninstall the CN2DN Linking Device
• Set the Node Addresses and Communication Rate
• Connect the CN2DN Device to a ControlNet Network
• Connect the CN2DN Device to a DeviceNet Network
Advertising