Rockwell Automation 1794-IF4I, -OF4I, IF2XOF2I, -IF4IXT, -IF4ICFXT, -OF4IXT, IF2XOF2IXT FLEX I/O Isolated Analog Modules User Manual
Page 110
![background image](/manuals/579281/110/background.png)
Publication 1794-6.5.8 - January 2010
110 Input, Output, Status and Configuration Files for Analog Modules when used with ControlNet
4 Output Isolated Analog Module (Cat. No. 1794-OF4I) Image Table
Mapping
Module Image
I/O Image
Read Back Channel 0
Read Back Channel 1
Read Back Channel 2
Read Back Channel 3
Input Size
Output Size
0 to 5 Words
0 to 6 Words
PU FP CF
BD DN
Channel Configuration
IC
RV QK CK GO
Channel #
Set to 0
EN
Hold Outputs
Wire-off
S1 S0
Output Data Channel 0
Output Data Channel 1
Output Data Channel 2
Output Data Channel 3
1
Q3 Q2 Q1 Q0
TR IT
Set to 0
EN S1 S0
Output Data Channel 0
Output Data Channel 1
Output Data Channel 2
Output Data Channel 3
Config. Size
7 Words
Module
Configuration
Safe State
Data
Set EN bit Off (0) for Configuration block
Set EN bit On (1) for Output block
S0 and S1 bits are not used in ControlNet applications. Set to Off (0).
Module actions (Reset, Safe State and Hold Last State) are set using programming software.