Rockwell Automation 1794-IF4I, -OF4I, IF2XOF2I, -IF4IXT, -IF4ICFXT, -OF4IXT, IF2XOF2IXT FLEX I/O Isolated Analog Modules - Manual (Page 4)

Publication 1794-6.5.8 - January 2010
Preface 4
Common Techniques Used
in this Manual The following conventions are used throughout this manual:
•
Bulleted lists such as this one provide information, not
procedural steps.
•
Numbered lists provide sequential steps or hierarchical
information.
For Additional Information
For additional information on FLEX I/O systems and modules, refer to
the following documents:
Chapter 4 Writing Configuration to and
Reading Status from Your
Module with a Remote I/O
Adapter Explains how to configure
your modules and read
status information from your
modules when using a
remote I/O adapter
Chapter 5 Communication and I/O
Image Table Mapping with
the DeviceNet/ControlNet
Adapter Explains how you
communicate with your
modules, and how the I/O
image is mapped when
using a DeviceNet adapter
Chapter 6 Input, Output, Status and
Configuration Files for
Analog Modules when used
with ControlNet Explains how you
communicate with your
modules over ControlNet.
Chapter 7 Calibrating Your Module Explains how to calibrate
your module.
Appendix A Specifications Specifications for the
isolated analog modules
Appendix B Class I, Division 2, Group A,
B, C, D Hazardous Locations
Statement Hazardous location approval
Section Title Contents
Catalog Numbers Voltage Description Publications
Installation
Instructions User Manual
1794 1794 FLEX I/O Product Data 1794-2.1
1794-ACN 24V dc ControlNet Adapter 1794-5.8
1794-ACNR 24V dc Redundant Media ControlNet Adapter 1794-5.18
1794-ADN 24V dc DeviceNet Adapter 1794-5.14 1794-6.5.5
1794-ASB/C 24V dc Remote I/O Adapter 1794-5.46 1794-6.5.9