Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 102)

Publication 1747-UM005B-EN-P - March 2006
8-14 Application Examples
RSLogix Software to SLC
Network via Modem
Example One of the primary purposes for the interface module is to connect
RSLogix software to a SLC 500 network by using modems. This
example shows you how to make this type of connection by taking
you through the steps necessary to set up the following system.
RSLogix Software to SLC Network
To connect RSLogix software to a SLC 500 network, the serial
communications port on the interface module that uses the DF1
protocol must be configured to match the interface parameters for the
computer serial port where RSLinx software is installed.
The text starting on the next page describes the procedure you use to
do this.
Interface Module
(1747-KE)
1747-C13 cable DF1 Protocol
Modem
Modem