Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 55)

1 Publication 1747-UM005B-EN-P - March 2006
Chapter
5
Module Configuration Using an ASCII
Terminal
This chapter guides you through the configuration of your interface
module using an ASCII terminal.
If you prefer to configure your module using backplane
communication, proceed to Chapter 6.
Once you complete the configuration, return to page 4-15 for
instructions on completing the installation of your module.
This chapter includes:
• configuration of the ASCII terminal.
• overview of module configuration with a terminal.
• top level setup menu.
• CONFIG port menu.
• DF1 port menu.
• DH-485 port menu.
• DF1 protocol menu.
• display parameters menu.
IMPORTANT
Configuration with an ASCII terminal is an alternate
configuration method than that presented in Chapter
6, Module Configuration Using the Backplane.