Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module User Manual
Page 110
Publication 1747-UM005B-EN-P - March 2006
8-22 Application Examples
10. To complete the driver configuration and attempt a connection,
click OK.
The Dialer window appears and relays the information about
the attempted connection. The dialer will repeatedly attempt to
establish a connection until the time duration expires or retries
as shown in the Dialer dialog.
When the connection is properly established, the status will be
connected to the 1747-KE module.
11. Click OK to exit the dialer and maintain a connection to the
network device.
12. If the connection was successful, click OK at the Modem
Initialization dialog which will return you to the Configure
Drivers dialog.
A successful connection is indicated by the status shown as
Running in the AB_DF1 driver. You are now ready to view the
network connection.