Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 50)

Publication 1747-UM005B-EN-P - March 2006
4-12 Installation and System Configuration
Connect to the DH-485 Port via the 1747-C11 Cable
The 1747-C13 cable can also connect the module’s DH-485 port
directly to a single SLC processor. It connects between the DH-485
port on the module and the DH-485 port on the SLC 500 processor.
Connect to the DH-485 Port via the 1747-C13 Cable
CONFIG Port
DF1 Port
DH-485 Port
Cable
(1747-C11)
J1 (CPU)
J2 (Peripheral) Cable
(1747-C11)
Power is supplied to link coupler through the
DH-485 port on the SLC 500 processor.
Power is supplied to link coupler by an
eternal power source.
OR
Link Coupler (1747-AIC) Interface Module (1747-KE)
Interface Module
(1747-KE)
SLC 500 Processor
Cable
(1747-C13)
Module is connected directly to the
DH-485 port on the SLC processor.