Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 104)

Publication 1747-UM005B-EN-P - March 2006
8-16 Application Examples
Configure the DF1 Modem Driver Using RSLinx 2.x or Later
The DF1 driver makes the communication connection between the PC
(sending modem) and the 1747-KE module (receiving modem). Once
configured, this driver can be called by the programming software
used to program the SLC processor.
The steps below describe how to configure the DF1 modem driver
using RSLinx Classic version 2.x. To begin:
1. Start RSLinx software.
2. Click on Start>Program Files>Rockwell Software>RSLinx>RSLinx
Classic.
Once RSLinx software is opened, you’ll need to add the
communication driver required for RSLinx software to communicate
across a modem to network hardware. To configure the driver:
1. Select the Communications menu.
2. Scroll down and select the Configure Drivers.