Rockwell Automation 1747-KE,D17476.12 DH-485/RS-232C Interface Module - Manual (Page 23)

1 Publication 1747-UM005B-EN-P - March 2006
Chapter
2
Quick Start
This chapter can help you to get started using the DH-485/RS-232C
Interface Module (catalog number 1747-KE). The procedures included
here assume that you have a basic understanding of SLC 500 products.
You should understand electronic process control and be able to
interpret the ladder logic instructions required to generate the
electronic signals that control your application.
Because it is a start-up guide, this chapter does not contain detailed
explanations about the procedures listed. It does, however, reference
other chapters in this book where you can get more information about
applying the procedures described in each step.
If you have any questions or are unfamiliar with the terms used or
concepts presented in the procedural steps, always read the
referenced chapters and other recommended documentation before
trying to apply the information.
This chapter:
• tells you what tools and equipment you need.
• lists preliminary considerations.
• explains how to install the module.
• describes when to configure the module.
• discusses system start-up procedures.
Required Tools and
Equipment Have the following tools and equipment ready.
• Medium blade screwdriver
• Programming equipment (RSLogix 500 software)