Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 303)

Index
I-2
C
C return values, B-137
C test program
compiling, 4-2
creating, 4-1
cables, C-1
configurations
25-pin COMM1, 2, 3 (/t1, /t2, /t3)
ports, C-4
9-pin COMM0 (/TERM) port,
C-1
connections
25-pin COMM1, 2, 3 (/t1, /t2, /t3)
ports, C-3
9-pin COMM0 (/TERM) port,
C-1
Ethernet port, C-5
Ethernet, 6-2
length
25-pin COMM1, 2, 3 (/t1, /t2, /t3)
ports, C-4
9-pin COMM0 (/TERM) port,
C-1
Ethernet port, C-5
catalog numbers, control coprocessor,
1-2
CC utility functions, 5-2
CC_STATUS, 3-19
clear messages, 5-13
control coprocessor ASCII display,
5-12
control coprocessor error, 5-12
how to use, 5-12
initialize control coprocessor, 5-12
status, 5-13
synchronization, 5-13
CC_DISPLAY _HEX, 5-12
CC_DISPLAY_DEC, 5-12, B-11
CC_DISPLAY_EHEX, 5-12, B-13
CC_DISPLAY_HEX, B-15
CC_DISPLAY_STR, 5-12, B-17
CC_ERROR, 5-12, B-19
CC_ERRSTR, 5-12, B-21
CC_EXPANDED_STATUS, 5-13,
B-23
CC_GET_DISPLAY_STR, 5-12,
B-25
CC_INIT, 5-12, B-27
CC_MKILL, 5-13
CC_PLC_BTR, B-28
CC_PLC_BTW, B-31
CC_PLC_STATUS, 5-13, B-34
CC_PLC_SYNC, 5-13, B-36
CC_STATUS, 3-19, 5-13, B-38
client/server applications, 6-19
analogy, 6-20
COMM0 port, main module, 1-3
COMM1 port, main module, 1-3
setting switches, 2-6
COMM2 and COMM3 ports, serial
expander module, 1-4
setting switches, 2-6
communication
direct-connect mode, 1-4
Ethernet, defined rate of, 6-1
parameters
configuring, 3-6
serial ports, setting up, 7-3
setting up, 3-6
standalone mode, 1-4
compiling, C test program, 4-2
configuration files
HOSTS file, 6-4
HOSTS.EQUIV file, 6-5
NETWORKS file, 6-6
PROTOCOLS file, 6-6
SERVICES file, 6-7
STARTINET file, 6-10
configuration functions, DTL, 5-3
configuring
communication parameters, 3-6
control coprocessor, 3-9
default startup parameters, 3-10
Ethernet port, 6-12