Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 32)

Chapter 3
Getting Started with the Control Coprocessor
3-3
See Appendix D for more information. See Chapter 5 and Appendix B for
more information on the A-B interface libraries.
To install the software:
1. Insert the first disk.
2. At the DOS prompt, type install dest_drive: and press
[Return] .
For example: if your source drive is b: and you want to install the
software on your hard drive c:, then type;
b:install c:
and press [Return] . The software displays a screen regarding the
licensing agreement and copyright protection.
3. Press [Return] .
Figure 3.2
Registration Screen
4. Fill in your company name (up to 31 characters) and address as well
as the serial number of your software.
5. Press [Return ] to save. You get the screen to install your software.