Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 94)

Chapter 6
Using the Ethernet Interface
6-13
FTP Send Session
The following example shows how you might conduct an FTP
send session:
Important: The following send session is an example only. It represents
how one network is set up and accomplishes an FTP session.
1. At the $ prompt, list the file to transfer. See Figure 6.11.
Figure 6.11
Starting FTP
2. At the $ prompt, type ftp and press [Return] . See Figure 6.11.
This utility starts the interface to the ARPANET standard File
Transfer Protocol and displays the initial status.
3. At the ftp prompt, type help and press [Return] . See Figure 6.11.
You get a list of all the available FTP commands.
4. At the ftp prompt, type help connect and press [Return ] . See
Figure 6.12 to get information about the FTP connect command.