Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 38)

Chapter 3
Getting Started with the Control Coprocessor
3-9
Create a Test Directory
At the $ prompt, type makdi r followed by a space and the name of the
test directory that you want to create; then, press [Return ] . Change
your working directory to the one that you just created. See Figure 3.10.
Figure 3.10
OSĆ9 CommandĆLine Interface Make Directory and Change Directory
Welcome to PCBridge
PCBridge Microware’s PC hosted OS-9/680x0 Development System
VT100 16:05 -CA -PR -LO -LF -LE +XO -CT CD COM1 9600N81 PCBridge
$ pd
$ makdir TEST_DIR
$ dir
Directory of . 16:07:18
TEST_DIR
$
Return to the PCBridge Main Menu from the OSĆ9 Command Line
Press [F1] to return to the PCBridge main menu from the OS-9 command-
line interface. From the PCBridge main menu, you can select other
PCBridge options.
You must do the following to configure the control coprocessor:
Toconfigure: See page:
Default startup parameters (CC_CFG) 3Ć10
System memory (MEM_CFG) 3Ć11
Configure the
Control Coprocessor