Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 95)

Chapter 6
Using the Ethernet Interface
6-14
Figure 6.12
FTP Help
5. At the ftp prompt, type connect and press [Return] . See
Figure 6.13.
Figure 6.13
Connect to Remote Network
6. At the ( to ) prompt , enter the name of the remote host. For this
example, the remote host is group_2 .
7. Enter user information (username and password) at the prompt. See
Figure 6.13. We receive a login confirmation message.
8. At the ftp prompt, type pd and press [Return ] for the current
remote network directory name. See Figure 6.13.
9. At the ftp prompt, type chd sys and press [Return] to change the
remote network directory. See Figure 6.14. The system response
shows the new directory.