Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual - Manual (Page 306)

Index
I-5
I
initialize control coprocessor
functions, CC utility, 5-12
installing
battery, 2-3
control coprocessor, 2-1
direct-connect mode, 2-7
standalone mode, 2-10
keying bands
main module, 2-5
serial expander module, 2-5
serial expander module, 2-9
software, personal computer, 3-2
INTERCHANGE software, using,
6-22
Internet
FTP utility, 6-12
defined, 6-12
get session, 6-16
send session, 6-13
Telnet utility, 6-17
Internet Protocol, Ethernet port,
addresses, 6-3
interpreting faults
main module, LEDs, 8-2
serial expander module
ASCII display, 8-1
LEDs, 8-2
K
keying bands, installing
main module, 2-5
serial expander module, 2-5
keyswitch, serial expander module,
1-4
L
LEDs
main module, 1-3
serial expander module, 1-4
status
main module, 8-2
serial expander module, 8-2
linking API functions to programs
direct-connect mode, 5-15
standalone mode, 5-18
local area network, Ethernet, 6-1
local chassis, standalone mode, 1-5
lock/unlock functions, TAG, 5-11
M
main module
battery backup, 1-3
COMM0 port, 1-3
COMM1 port, 1-3
control coprocessor, 1-3
Ethernet port, 1-3
hardware overview, 1-3
in standalone mode, removing, 2-11
interpreting faults, LEDs, 8-2
keying bands, installing, 2-5
LEDs, 1-3
RAM memory, 1-3
reset switch, 1-3
setting switches, COMM1 port, 2-6
standalone mode, removing, 2-11
memory module, loading via
PCBridge, D-4
modes of communication
direct-connect mode, 1-4
standalone mode, 1-4
module memory
NVMM utility, 3-16
system memory, configuring, 3-15
MSG instructions, 5-2
control coprocessor MSG functions,
5-8
how to use, 5-7
PLC-5 programmable controller,
5-7
MSG_CLR_MASK, B-88
MSG_READ_HANDLER, 5-9, B-90
MSG_READ_W_HANDLER, 5-9,
B-94
MSG_SET_MASK, B-98
MSG_TST_MASK, B-100