Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual User Manual
Page 56
Advertising
Chapter 4
Using the Programming Environment
4-4
In OS-9, you type the full file name to execute the command. In our
example, the full file name is HELLO. The executable file for OS-9
does not have an extension—as compared to an executable DOS file,
which has a .COM, .EXE, or .BAT extension.
3.
Select
B)
Binary
on the Select File Transfer Type screen.
See Figure 4.5.
Figure 4.5
Select File Transfer Type
The C test file is sent to the control coprocessor via Kermit. You see the
screen illustrated in Figure 4.6 being updated while the file is transferred.
Figure 4.6
Kermit Send File
Refer to Appendix D, Using PCBridge, for information on loading
memory modules.
Advertising