Compile a c test program – Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual User Manual
Page 54
Advertising
Chapter 4
Using the Programming Environment
4-2
Figure 4.1
C Test Program
This example creates a test file named HELLO.C.
4.
Use the exit function on your text editor to return to the PCBridge
main menu.
To compile the C test program:
1.
Select
B)
Build
on the PCBridge main menu.
2.
Enter the name of the test file and press
[Return]
. See Figure 4.2.
Figure 4.2
Enter Name of Test File for Compiling
Compile a C Test Program
Advertising