Configure communication parameters – Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual User Manual
Page 35
Advertising
Chapter 3
Getting Started with the Control Coprocessor
3-6
To configure parameters for the communication interface between the
personal computer and the control coprocessor:
1.
Select
C)
Configuration
Options
on the PCBridge main menu.
You get the PCBridge Configuration Options screen. See Figure 3.6.
Figure 3.6
PCBridge Configuration Options Screen
2.
On the PCBridge Configuration Options menu, select
C)
Communication
Parameters
. See Figure 3.7.
Figure 3.7
PCBridge Communication Parameters Screen
Configure Communication
Parameters
Advertising