Find other osć9 commands what to do next – Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual User Manual
Page 52
Chapter 3
Getting Started with the Control Coprocessor
3-23
5.
At the
$
prompt, type
dir
and press
[Return]
. Observe that
the text file was successfully transferred to the RAM disk .
See Figure 3.26.
Figure 3.26
Check Directory for Test File
Welcome to PCBridge
PCBridge Microware’s PC hosted OS-9/680x0 Development System
VT100
16:05 -CA -PR -LO -LF -LE +XO -CT CD COM1 9600N81 PCBridge
$ dir
Directory of . 16:07:18
test.txt
$ list test.text
6.
At the
$
prompt, type
list
test.txt
and press
[Return]
. The
contents of the file are typed to the screen. Note that
list
is the
OS-9 equivalent of the MS-DOS type command.)
See the OS-9 Operating System User Manual, publication 1771-6.5.102,
for information on other OS-9 commands and utilities.
Proceed to Chapter 4. In Chapter 4, you create sample BASIC and C
programs and download them to the control coprocessor. You run the
programs and see the results typed to the screen.
Find Other OSĆ9 Commands
What to Do Next