Rockwell Automation 1771-DMC_DMC1_DMC4_DXPS Control Coprocessor User Manual User Manual
Page 33
Advertising
![background image](/manuals/579606/33/background.png)
Chapter 3
Getting Started with the Control Coprocessor
3-4
Figure 3.3
Download the PCBridge Software
6.
Press
[Return
] to begin installing the software. The percentage-
complete graph increments as the software is loaded.
7.
Install the remaining disk(s) when the system prompts you.
Figure 3.4
Files to Modify
Important: After you have installed the disks, the system informs you of
any files that you must modify—e.g., AUTOEXEC.BAT, PCB.CNF—to
enable the compiler to start properly.
Do not use the NOEMS flag as part of the EMM386.EXE command in
the CONFIG.SYS file. Instead, use the RAM flag, which allows the
PCBridge software and other applications to use both extended and
expanded memory.
C:\
DIRECTORY STRUCTURE
PCBRIDGE
EDITOR
INET
OS9C
DEFS
LIB
UTIL
EXAMPLES
BIN
Advertising