Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 100)

Publication 1738-UM001A-EN-P - February 2005
B-26 Quick Start For the 1738-ADNX
7. From the RSNetWorx for DeviceNet main menu, select
File>Save. Now you can observe how you would switch
networks.
Switch Between Networks
1. Move the cursor over the 1738-ADNX in the network browse
window.
2. Press the right mouse button.
3. Click Associated Network from the menu.
If prompted to save your changes, you must select Yes (you will
probably not get this prompt if you saved earlier).
To get back to the main network, associate the SubnetADNX.dnt
project to MainNetworkADNX.dnt using the following steps:
4. Double click on the 1738-ADNX adapter at Node 16.
5. Click the Device Bridging tab.