Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 90)

Publication 1738-UM001A-EN-P - February 2005
B-16 Quick Start For the 1738-ADNX
4. Drill down from Ethernet into your ControlLogix demo box
through the backplane to your 1756-DNB in slot 3, channel A,
1738-ADNX and select DeviceNet Subnet as shown below:
5. To go on line, click OK to accept the path configuration and then
OK to the prompt.
Wait for the browse to complete.
6. From the RSNetWorx for DeviceNet main menu, select
File>Save As.
7. Type in SubNetADNX as the filename.
8. Click Save.
Last time you browsed the main network This time you will browse the Subnet
IMPORTANT
You must save your work before continuing.