Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 99)

Publication 1738-UM001A-EN-P - February 2005
Quick Start For the 1738-ADNX B-25
2. Select the Device Bridging tab. The following window opens.
This window lets you define a file that is associated with this
one through the 1738-ADNX. Once you specify the associated
file, you will be able to jump to that file through a menu
selection from the 1738-ADNX. The file you need to associate in
this case is the MainNetworkADNX.dnt project file you created
earlier.
3. Click the Associate File button.
4. Make sure you are looking in the Networks folder in the path
shown below.
5. Select MainNetworkADNX.dnt then the Open button. The
MainNetworkADNX.dnt file will appear in the File box as shown
below.
6. Click OK to close the properties window.