Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 97)

Publication 1738-UM001A-EN-P - February 2005
Quick Start For the 1738-ADNX B-23
6. Select Output Value #1 and notice the exact location of that bit is
displayed. You can easily tell that Output Value #1 is in byte 2,
bit 1 (see the highlighted portion of byte 2). This information
will make it very easy to write your ladder logic later.
You uploaded the scanlist and looked at the input and output
data. Now you are about to save this information to your hard
disk.
7. Click OK (not cancel) to close this window.
Click OK and not Cancel to close the window.