Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 111)

1 Publication 1738-UM001A-EN-P - February 2005
Appendix
D
Default Data Maps
I/O messages are sent to (consumed) and received from (produced)
the ArmorPoint I/O modules. These messages are mapped into the
processor’s memory. This appendix lists the default data maps for
1738 ArmorPoint I/O modules.
For the default data map of: See page:
1738-IA2 Input Module D-2
1738-IB2 Sink Input Module D-2
1738-IB4 Sink Input Module D-2
1738-IB8 Sink Input Module D-3
1738-IV4 Source Input Module D-3
1738-IV8 Source Input Module D-3
1738-OA2 Output Module D-4
1738-OB2E Electronically Protected Output Module D-4
1738-OB2EP Protected Output Module D-4
1738-OB4E Electronically Protected Output Module D-5
1738-OB8E Electronically Protected Output Module D-5
1738-OV4E Protected Sink Output Module D-6
1738-OW4 Relay Sink/Source Output Module D-6
1738-IE2C Analog Current Input Module D-7
1738-IE2V Analog Input Module D-8
1738-OE2C Analog Current Output Module D-9
1738-OE2V Analog Output Module D-9
1738-IJ Encoder/Counter Module D-10
1738-IR2 RTD Input Module D-10
1738-IT2I Isolated Thermocouple Input Module D-11
1738-VHSC 24V dc High Speed Counter Module D-12
1738-SSI Synchronous Serial Interface Absolute Encoder Module D-12
1738-232ASC ASCII Module D-13
1738-485ASC ASCII Module D-13