Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 128)

Publication 1738-UM001A-EN-P - February 2005
4
P
parameters
1738-ADNX MACID B-9
adapter 5-4
foreground to background poll ratio 4-5
I/O data, adapter 5-5
map from scanner 4-6
scanner 4-3
scanner data alignment 4-6
scanner expected packet rate setting
4-5
scanner interscan delay 4-5
scanner transmit retries 4-5
setting adapter 5-3
physical list acquire status 2-13
physical ordering 2-16
PointBus 2-2
data collection 2-7
poll/COS connection consume size 2-14
polled P-4, 2-6, 2-23
power
expansion power unit 2-7
supplying power to ArmorPoint I/O
modules 2-7
primary DeviceNet network
configure 2-4
products related to adapters P-5
products related to ArmorPoint I/O
products P-5
purpose of manual P-1
Q
quick start
1738-ADNX B-1
R
related documentation P-5, 2-7
related products P-5
related terms P-3
remove and reinsert modules on
DeviceNet network 2-5
removing I/O base from mounting base
3-5
review
1738-ADNX rules B-9
RSNetWorx for DeviceNet P-4, 3-5,
4-1, 5-1
using 3-5
RSNetWorx for DeviceNet software P-1
rules
using 1738-ADNX C-1
S
scanner
adding I/O modules to network 4-3
adding to network 4-2
configuration overview 4-1
data alignment 4-6
expected packet rate
setting 4-5
foreground to background poll ratio 4-5
going on line 4-8
interscan delay 4-5
setting parameters 4-3
settings in RSNetWorx for DeviceNet
4-6
transmit retries 4-5
self-test
of adapter when power applied 2-8
set backplane baudrate 2-3
set backplane I/O module address 2-3
set node address 1-2
set subnet baudrate 2-3
set subnet I/O module address 2-3
software
Configuring scanner subnet 4-1
configuring the adapter for DeviceNet
5-1
RSNetWorx for DeviceNet P-1, P-4,
2-8, 3-5
specifications A-1
status indicators 6-1
strobe P-4, 2-6, 2-23
strobe connection produce size 2-14
subnet
configure I/O 2-3
set I/O module address 2-3
understanding 2-6
subnet baudrate
setting 2-3
subnet network 2-7
switch between networks B-26
T
terminal marking kits P-6
terms defined P-3
terms used in manual P-3
transmit retries 2-18