Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 65)

Publication 1738-UM001A-EN-P - February 2005
Add the ArmorPoint DeviceNet Adapter to the DeviceNet Scanner’s Scanlist 5-5
The following screens show the remaining configuration windows.
The window below shows an example EDS file.
This completes the configuration options. Your adapter must go on
line for the configuration to take effect.
Connection sizes appear only when the Subnet
network file has been associated in the Device
Bridging window.
These values correspond to the 4 parameters
(Poll/COS Connection Consume Size, Poll
Connection Produce Size, COS Connection
Produce Size, Strobe Connection Produce
Size) found in the device’s Parameters
window.
Click here to view the EDS
file. An example of the
EDS file is shown below.
I/O Data window
EDS File window