Rockwell Automation 1738-ADNX ArmorPoint I/O DeviceNet Adapters - Manual (Page 80)

Publication 1738-UM001A-EN-P - February 2005
B-6 Quick Start For the 1738-ADNX
15. Click Edit I/O Parameters.
16. Verify that nothing is filled in for input and output sizes (both
are zero). If you knew how much data was being produced and
consumed on the Subnet, you could fill these fields in manually.
Because it is easier to let RSNetWorx for DeviceNet fill in these
values for us, click Cancel to close this window.
Click the 1738-ADNX
in the Scanlist and
then click Edit I/O
Parameters to
verify input and
output bytes.