Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 15)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 13
Chapter
1
Installation
Hardware
Dimensions
Power Connection
To comply with the CE Low Voltage Directive (LVD), this equipment must be
powered from a source compliant with Safety Extra Low Voltage (SELV) or
Protected Extra Low Voltage (PELV).
To comply with UL restrictions, this equipment must be powered from a source
compliant with Class 2 or Limited Voltage/Current.
ATTENTION: Do not wire more than one conductor on any single terminal.
80 mm
(3.15 in) 136 mm
(5.35 in)
152 mm
(5.98 in)