Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 71)

Rockwell Automation Publication 1788-UM057B-EN-P - September 2014 69
Appendix
C
Field Device Block Configuration Examples
Overview This appendix provides examples of how to use field bus output devices with the
linking device.
Each example starts from an empty live list, adds the device to the network, and
configures an analog output (AO) or discreet output (DO) function.
The purpose of these examples is to place the AO or DO function block in the
Cas mode, so the values entered in CAS_IN are processed into the SET_POINT
value.
See Field Device Block Configuration on page 36 for general field device block
configuration information.
Figure 11 - Empty Live List