Field device block configuration – Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device User Manual
Page 38
36
Rockwell Automation Publication 1788-UM057B-EN-P - September 2014
Chapter 2
Set Up in the Studio 5000 Logix Designer Application
Field Device Block Configuration
You can configure the field device blocks
from the block configuration view.
Choose the Configuration option of the
device in the config tree, or from the
right-click menu in the live list.
Configuration is device-centric and
performed in a graphical view using
blocks, wires, and connectors (see
Figure 5 on page 34
). The graphical
interface also provides access to
parameters for each block for detailed
configuration of each device.
See
Configuration Examples on page 69
for
detailed information about how to
configure AO and DO function blocks.
Table 3 - Field Device Configuration Tools
Icon
Description
Select and move objects.
Draw wire.
Go online with device.
Download configuration to device.
Print.