Rockwell Automation 1788-CN2FFR EtherNet/IP and ControlNet to FOUNDATION Fieldbus Linking Device - Manual (Page 82)

80 Rockwell Automation Publication 1788-UM057B-EN-P - September 2014
Appendix C Field Device Block Configuration Examples
DO Function Block Example This example describes the how to configure a DO function block for the linking
device. The device that is used in this example is FPAC_2.
1. Add the linking device to the field bus network.
2. Add a DO function block to the configuration.
TIP You can delete other function blocks and connections.