Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 10)

P-2 About This Manual
The following conventions are used throughout this manual:
• Parameter names are shown in the format Parameter xx - [*]. The
xx represents the parameter number. The * represents the parameter
name. For example Parameter 01 - [Config Mode].
• Menu commands are shown in bold type face and follow the format
Menu > Command. For example, if you read “Select File > Open,”
you should click the File menu and then click the Open command.
• RSNetWorx for DeviceNet (version 4.01) and RSLinx (version 2.40)
were used for the screen shots in this manual. Different versions of
the software may differ in appearance and procedures.
• The firmware release is displayed as FRN X.xxx. The “FRN”
signifies Firmware Release Number. The “X” is the major release
number. The “xxx” is the minor update number.
• This manual provides information about the 1769-SM1 Compact I/O
to DPI/SCANport module and using it with up to three drives. The
module can be used with other products that support DPI or
SCANport. Refer to the documentation for your product for specific
information about how it works with the module.
Conventions Used in this Manual