Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 39)

Configuring the Module 3-9
5. An alternate to using the Chan. 1-3 tabs to enter data is the Generic
Extra Data Config tab ( Figure 3.8 ), which is being shown for
identification purposes only. With the easy-to-use Chan.1-3 tabs,
there is no need to enter data using the Generic Extra Data Config
tab. However, it does show how the data in the configuration words
are stored in the controller.
Figure 3.8 Generic Extra Data Config Tab Screen
6. Click OK when finished. The MicroLogix 1500 will download the
configuration data to the 1769-SM1 when the controller is placed in
run mode.