Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 88)

7-4 ControlLogix w/1769-ADN DeviceNet Ladder Example Program
To configure the 1769-ADN for use with the example program using
RSNetWorx for DeviceNet (version 3.21), perform the following steps:
1. Double-click on the 1769-ADN adapter icon in the graphic view
window ( Figure 7.3 ) to display the 1769-ADN adapter image screen
( Figure 7.4 ). For the system in the ladder example, the node address
setting on the adapter is “2.”
Figure 7.4 1769-ADN Adapter Image Screen
2. Select the Module Configuration tab screen ( Figure 7.5 ) and build
the remote ADN system by dragging and dropping components. In
the ladder example, the remote drop consists of an ADN, PA4 power
supply, SM1 module, and ECR end cap terminator.
Setting Up the 1769-ADN