Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 35)

Configuring the Module 3-5
Figure 3.1 I/O Configuration Window and Expansion General Configuration Screen
2. Enter the product data for the module as shown above (1, 109, 17,
and A), along with the desired Input and Output word length. Enter
“60” in the Extra Data Length field and click OK. From the I/O
Configuration window, click on the Adv Config command button
again and now there are two tabs available (
Figure 3.2 ).
Figure 3.2 Expansion General Configuration Screen w/Generic Extra Data Config Tab