Rockwell Automation 1769-SM1 Compact I/O to DPI/SCANport Module - Manual (Page 119)

Appendix
B
Module Parameters
Appendix B provides information about the parameters of the 1769-SM1
module.
The parameters in the 1769-SM1 module are numbered consecutively.
Topic Page
About Parameter Numbers B-1
Parameter List B-1
About Parameter Numbers
Configuration Tool Numbering Scheme
• DriveExplorer
The 1769-SM1 parameters begin with parameter 01. For
example, Parameter 01 - [Config Mode] is parameter 01
as indicated by this manual.
• DriveExecutive
• HIM
TIP: All 1769-SM1 module parameters except Parameters 01 -
[Config Mode] and 02 - [Reset Module] are grouped by module
channel number (CH1, CH2, and CH3). The parameter names include a
suffix number that corresponds with its assigned channel.
Parameter List
Parameter
No. Name and Description
Details
01 [Config Mode]
Displays the module’s configuration mode set with
the Configuration Mode switch (
Figure 2.1 ).
Default: 0 = Controller
Values: 0 = Controller
1 = Parameter
Type: Read Only