Rockwell Automation 2706-PRIO_PDH485_PDHP_PDNET_PCNET_PENET_PENET1 InView Communication Module User Manual - Manual (Page 10)

Publication 2706-UM017C-EN-P - March 2006
1-4 Introduction to InView Connectivity
your existing office network to communicate information to the entire
factory.
See publication 2706-IN008, for information on installing and setting
up Ethernet TCP/IP.
Serial RS-232 Communications
PC based RS-232 connection to communicate to an InView display.
This is done via the InView messaging software, Instant Messenger, or
the ActiveX control in RSView32 software. This is effective for a single
display located 15.24 m (50 ft) from the PC or when downloading
message applications.
PC
EtherNet TCP/IP
InView Display
TCP/IP Module
2706-PENET1
PC RS-232
InView Display