Rockwell Automation 2706-PRIO_PDH485_PDHP_PDNET_PCNET_PENET_PENET1 InView Communication Module User Manual - Manual (Page 38)

Publication 2706-UM017C-EN-P - March 2006
3-16 InView Communication Module Connections
Connecting a Computer to DH-485 Connector Using a Power Supply
Connecting a Computer to DH-485 Connector Using a DH-485 Powered Device
Cable Cat. No.
1747-C10 Cat. No.
1747-C11 Cat. No.
1747-C20
Personal Computer
Interface Converter
(Cat. No. 1747-PIC)
25-pin to 9-pin
Adapter (if
required)
Wallmount Power Supply
Cat. No. 1747-NP1
InView Messaging
To DH-485 Programming
Connector To DH-485
Communications Port
DH-485 Comm
Module
Personal Computer
Interface Converter
(Cat. No. 1747-PIC)
25-pin to 9-pin
Adapter (if
required)
SLC 500 or DH-485
Network
Cable Cat. No.
1747-C10,
1747-C11,
1747-C20
To DH-485 Programming
Connector
To DH-485
Communications Port
InView Messaging
DH-485 Comm
Module
TIP
The computer can connect to any node on the
network. It is not necessary to directly connect the
computer to the InView communication module.