Rockwell Automation 2706-PRIO_PDH485_PDHP_PDNET_PCNET_PENET_PENET1 InView Communication Module User Manual - Manual (Page 54)

Publication 2706-UM017C-EN-P - March 2006
4-4 Application Guide
ControlLogix 5000 Controller
ControlNet Communications Setup
InView Parameters
• Node address. Node address (1 to 99 decimal) of the InView
display on the ControlNet network.
• Interscan Delay. Time interval (in ms) between display updates.
The range is 100 to 1,000 ms. The default is 100. This parameter
determines how frequently the InView display requests
Unscheduled data.
Network Node Parameters
• Node Type. The type of controller that the InView display
communicates with.
• Node Address. The node address of the controller on the
ControlNet network.