Rockwell Automation 2706-PRIO_PDH485_PDHP_PDNET_PCNET_PENET_PENET1 InView Communication Module User Manual - Manual (Page 42)

Publication 2706-UM017C-EN-P - March 2006
3-20 InView Communication Module Connections
Make ControlNet Connections
Use the pinout information below to connect the InView
communication module to a ControlNet network.
ControlNet Connections
IMPORTANT
Follow the ControlNet network layout and design as
specified in the ControlNet Cable System Planning
and Installation Manual, publication 1786-6.2.
NAP Connector Details
Pin # NAP Signal
1 Signal Common
2 No Connection
3 TX_H
4 TX_L
5 RX_L
6 RX_H
7 No Connection
8 Signal Common
Shell Earth Ground
Channel B Channel A
Pin 1
NAP Connector
Redundant BNC Cable Connectors