Rockwell Automation 2706-PRIO_PDH485_PDHP_PDNET_PCNET_PENET_PENET1 InView Communication Module User Manual - Manual (Page 55)

Publication 2706-UM017C-EN-P - March 2006
Application Guide 4-5
For a Logix controller, a valid address consists of the ControlNet
module’s node number (1 to 99) followed by a space, a Logix
backplane number (usually 1) followed by a space, and a Logix slot
number.
Example: 99 1 99
ControlNet Tag Setup
• Message Trigger Address. The controller address that triggers a
message to display. This toggles between 0 and 1 in the
controller.
• Message Data Address. The starting address of the message data
displayed. The message data contains the trigger command that
the InView display recognizes (^T[message number]^M).
• Message Array Size. The size of the array (16 to 128 characters
for ControlNet) containing the message data. The maximum
array size is dependent on the controller and must be an even
integer.
IMPORTANT
All four tags for Message Trigger Address, Message
Data Address, Variable Trigger Address, Variable
Data Address, and the array sizes must be entered
and established in the controller as valid tags even if
they are not used.