Create recipe ladder program – Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual User Manual
Page 103
Advertising
![background image](/manuals/580054/103/background.png)
Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
95
Using microSD Cards Chapter 9
Create Recipe ladder program
1.
Launch Connected Components Workbench. Create a user program for
your Micro820 controller.
2.
Right-click Programs. Select Add New LD: Ladder Diagram. Name the
Program (for example, Prog2).
Advertising
This manual is related to the following products: