Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 50)

42 Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
Chapter 5 Communication Connections
Configure Serial Port You can configure the Serial Port driver as CIP Serial, Modbus RTU, ASCII or
choose Shutdown through the Controller Configuration tree in Connected
Components Workbench software.
By default, when a Micro820 controller is added to the Project Organizer in
Connected Components Workbench, Remote LCD parameters are configured
to overwrite serial port settings.
To edit serial port settings, go to the Remote LCD configuration page and
uncheck the Configure Serial Port for Remote LCD option button.
uncheck this option