Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual User Manual
Page 132
124
Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
Appendix C
Quickstarts
7.
When the flash update is complete, you see a status screen similar to the
following. Click OK to complete the update.
Establish Communications
between RSLinx and a
Micro820 Controller
through USB Port on
2080-REMLCD
This quick start shows you how to get RSLinx RSWho to communicate with a
Micro820 controller through a USB.
1.
RSLinx Classic is installed as part of the Connected Components
Workbench software installation process. The minimum version of
RSLinx Classic with full Micro820 controller support is 3.60.01 (released
on December 2013).
2.
Power up the Micro820 controller.
3.
Plug USB A/B cable directly between your PC and the USB port on the
2080-REMLCD.
4.
Windows should discover the new hardware. Click No, not this time and
then click Next.