Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 104)

96 Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
Chapter 9 Using microSD Cards
3. From the Toolbox, double-click Direct Contact to add it to the first rung.
4. From the Toolbox, double-click Block to add it to the rung.
5. On the Block Selector window that appears, type RCP to filter the Recipe
function block from the list of available function blocks. Click OK.
6. From the Toolbox, double-click rung to add another rung.
7. Add a Direct Contact and RCP function block to this second rung by
following steps 3…5.
8. Create the following local variables for your program, in addition to the
ones that you have already created for datalog.