Back up a password-protected controller, Configure controller password – Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual User Manual
Page 68
60
Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
Chapter 7
Controller Security
7.
Swap controller1 hardware with controller2 hardware.
8.
Power up controller2.
9.
Click Connect.
10.
Select target controller2.
11.
Click Download.
12.
Lock controller2. See
Configure Controller Password on page 128
.
Back Up a Password-Protected Controller
In this workflow, user application will be backed up from a Micro800 controller
that is locked to a memory plug-in device.
1.
On the Device Toolbox, open Discover. Click Browse Connections.
2.
Select the target controller.
3.
When requested, enter the controller password.
4.
Back up controller contents from the memory module.
Configure Controller
Password
To set, change, and clear controller password, see the quickstart
instructions