Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 55)

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013 47
Communication Connections Chapter 5
Configure ASCII
1. Open your Connected Components Workbench project. On the device
configuration tree, go to Controller properties. Click Serial Port.
2. Select ASCII on the Driver field.
3. Specify baud rate and parity.
ASCII Parameters
Parameter Options Default
Baud Rate 1200, 2400, 4800, 9600, 19200, 38400 19200
Parity None, Odd, Even None
Control Line RS485
No Handshake
No Handshake
Deletion Mode CRT
Ignore
Printer
Ignore
Data Bits 7, 8 8
XON/XOFF Enabled or Disabled Disabled
Stop Bits 1, 2 1
Echo Mode Enabled or Disabled Disabled
Append Chars 0x0D,0x0A or user-specified value 0x0D,0x0A
Termination Chars 0x0D,0x0A or user-specified value 0x0D,0x0A