Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 99)

Rockwell Automation Publication 2080-UM005A-EN-E - December 2013 91
Using microSD Cards Chapter 9
7. Assign the variables to the DLG input and output parameters as follows:
Note: For CfgID input parameter, you can choose a predefined variable by
choosing from the Defined Words in Connected Components Workbench. To
do so, click the CfgID input box. From the Variable Selector window that
appears, click the Defined Words tab and choose from the list of defined words
(for example, DSET1 which corresponds to DSET1 in your recipe
configuration). See the following screenshot.