Rockwell Automation 2080-LC20-20QBBR Micro820 20-point Programmable Controllers User Manual - Manual (Page 112)

104 Rockwell Automation Publication 2080-UM005A-EN-E - December 2013
Appendix A Specifications
Relay Output Specifications for O-00...06 for 2080-LC20-20QWB(R),
2080-LC20-20AWB(R)
Attribute Value
Voltage, min 5 V, AC
5 V, DC
Voltage, max 250 V, AC
Maximum switching time 10 ms, turn on
10 ms, turn off
Life 10,000,000 cycles (mechanical)
100,000 cycles (Electrical with UL test load)
Relay Contact Ratings
Maximum
Volts Amperes Amperes
Continuous Volt-Amperes
Make Break Make Break
120 V AC 15 A 1.5 A 2 A 1800 180
240 V AC 7.5 A 0.75 A
24 V DC 1.0 A 1 A 28
125 V DC 0.22 A
Analog Output Specifications
Attribute Value
Output count range 0...4008
Output type Voltage
Output Voltage Range 0…10V
Voltage Output Maximum Load (Resistive) >1000 Ohms
Accuracy 2% of full scale for voltage
Resolution 12-bit, 2.5 mV/count
Output update rate (with no output capacitance), max 20 ms
Channel-to-bus isolation No isolation
Channel-to-channel isolation No isolation
DC Output Specifications for 2080-LC20-20QBB(R)
Attribute Standard Outputs
(Outputs O-00…O-05) High Speed Output (1)
(Output O-06)
User supply voltage 10V DC, min
26.4V DC, max
10V DC, min
26.4V DC, max
Load current, min 10 mA
On state voltage drop 1V @ max load current
2.5V @ max surge
current
1.5V @ max load current